Watch me build 5 PCBs in 42 seconds. This is 1 minute per frame, taken over an 11 hour period with about 5 hours of idle pictures cut out (lunch, dealing with part supply problems, etc)

Two videos:

	Overview: See the workbench and my back. The microscope is center, with two lamps providing the lighting. Soldering iron to the right, and a hot-air rework station on the top shelf (thick black tube). I'm getting parts from the small box on the left.
	Closeup: The view under the microscope. This is not taken through the microscope, so you'll not be able to make out the very small (0.4mm x 0.2mm) components I'm installing onboard, but should be able to see the larger chips go on.